Pool Rescuers
Supporting Sources
target url Pool Rescuers
folder top Pool Rescuers
photo Pool Rescuers
spreadsheet Pool Rescuers
form Pool Rescuers
drawing Pool Rescuers
document Pool Rescuers
presentation Pool Rescuers
video Pool Rescuers
video Pool Rescuers
video Pool Rescuers
Pool Rescuers
Pool Construction and Repair
Nothing brings family and friends together like a swimming pool. However, pools aren’t cheap and require regular maintenance and repair.
Pool industry tricks can include omitting curing procedures from resurfacing proposals, which will void any warranty. This process can take up to a month and requires extensive labor, chemical additions, and management.
Cracked Tiles
When one or more tile sections fail, it’s important to get these repaired as quickly as possible. This will not only ensure that the area remains attractive, but it also helps to protect the structure of the pool. This is because a crack in any part of your pool can eventually spread to the rest of it, and could result in the loss of stability.
One way to reattach a cracked or missing tile is by using swimming pool thin set mortar cement. This is very simple and straightforward and can be done with just a few tools. First, the tile must be removed from the surface of the pool. This can be done with a hand tile hammer or an electric tile hammer, but it is generally better to use the hammer with a diamond blade as this will minimize the amount of tile chipping that needs to occur.
After the broken tile has been removed, it is important to check the condition of the pool wall and deck for signs of additional damage. This is particularly true in cold climate regions where freeze/thaw cycles can deteriorate the concrete of the deck and bond beam, causing it to shift or delaminate. In these cases, it may be necessary to build up the pool’s foundation using hydraulic cement, prior to re-tiling the structure.
If you’re able to find a good match to your existing tiles, then it’s important to purchase high quality waterproof tile grout and swimming pool thin set mortar cement. These are available from most any pool supply store. It’s also a good idea to have a chisel and a notched trowel on hand, as these tools will come in handy when you need to repair the cement around the new tile.
You’ll want to dampen the repair area slightly with water, and then apply a golf ball-sized dab of thin set to the back of your replacement tile. Press it firmly in place and hold it in position with duct tape until the mortar is dry. Depending on the weather, this can take up to 48 hours or more.
Broken Pump
The pump is one of the most important parts of your pool, not only because it moves water from one place to another, but also because it helps with water filtration. That’s why it’s crucial to know the signs of a broken pump so you can catch it before it breaks down completely, saving you money and making your swimming time less enjoyable.
If your pump is constantly shutting off, it could be a sign that it’s overheating. A good way to check for this is by looking at the motor. The motor should be a uniform color, without any spots of rust or burnt paint. If it is, then the motor is overheating and needs to be repaired or replaced.
You can also see if the motor is overheating by looking at the temperature gauge on the filter tank or checking to see if your skimmers are sucking up air. This can cause low flow and lower pressure in the filter. If this is the case, you need to check the filter, skimmer, return side of pipes and valves for obstructions or clogs.
It’s also possible that the motor is just old and starting to wear out. This can be fixed by replacing the bearings, but this is a job that’s best left to professionals. If you do decide to replace your pump, it’s best to go with a variable speed model. This allows you to control the speed of your pump and will reduce the stress on older copper plumbing.
A broken pump can leave your swimming pool unclean and filled with bacteria, dirt, algae and other debris. This makes it harder to enjoy your swimming time and can even lead to waterborne diseases if left untreated. So if you’re experiencing any of the above problems, don’t hesitate to call for professional help as soon as possible. Keeping up with regular maintenance and repairs will increase your pool’s lifespan and allow you to spend more time enjoying it. With advancements in plastic, which is lighter and nearly eliminates corrosion issues, easy-off lids, bigger baskets that can be cleaned more frequently, galvanized steel, Viton seals, and variable-speed drives, it’s easier than ever to keep your pool running smoothly.
Clogged Filter
If you notice that the water in your pool looks murky and not clean, it could be because of a clogged filter. The pool filters are designed to trap debris like leaves and grass clippings from entering the water. When there is too much debris, the filter will clog very quickly. A clogged filter also means that the system is not properly circulating the water, which can cause other problems in the pool.
There are a few things you can do to try to unclog the filter. One is to use a bladder-type hose jet, which has a unique design that allows you to concentrate the pressure of the water on the area where the clog is located. This will force the clog to break up and can sometimes unclog even stubborn clogs. Another thing you can try is a backwash. Backwashing is when you flush the filter with water to clear out any debris or particles that are stuck in the filters. This will often solve the problem and get your pool water looking cleaner.
If the filter has a pressure gauge, you can check to see what it’s reading. A high reading may mean that there is too much pressure in the filter, or it may be that the gauge is not functioning correctly. If the pressure is high, shut down the pump and remove the pressure gauge to check for a clog in the air bleeder assembly where the gauge screws into it. This can be done using a pair of pliers or a screwdriver.
Other times, you may need to replace the filter media, which is composed of either cartridges, grids or sand. If the filter media is old or dirty, it will not be able to filter out all the debris that is in the water, so you will need to replace it. You can purchase replacement cartridges, grids or sand at any local pool supply store.
Finally, it’s important to regularly inspect the filter and pump equipment to make sure that all connections are tightened and sealed. This will prevent leaks that can lead to damage and a decrease in performance. A few simple steps like this can help to extend the life of your filter and ensure that it runs as smoothly as possible.
Light Bulb Replacement
Most backyard pools come equipped with one or more lights, and it’s not uncommon for them to burn out. Luckily, replacing your pool’s light bulbs is a simple process that doesn’t require draining the entire pool. Instead, you can simply remove the light housing from the wall and change out the bulb. This will save you time, money, and hassle compared to completely emptying the pool for light bulb replacement.
When you’re ready to replace your pool light bulb, first make sure the power is off at the circuit breaker that powers it. This is an easy thing to forget, so be sure that it’s off before beginning any work on the light fixture. Also, remember to use a multimeter to ensure that there is no electricity running through the wires before touching them with your bare hands.
Then, locate the wire that connects the light to its housing. It’s important to note how the wire is connected in case you need to disconnect it in the future. Most of the time, the light is held to its housing with a screw. Be sure to remove this screw carefully and to dry off the screwdriver and your hands before continuing. Any moisture can cause the new bulb to fail shortly after being installed.
Once the screw is removed, take the light housing and place it on the pool deck. There should be enough slack in the wire to allow you to get it out of the niche without having to drain the whole pool. Set the housing down on a towel so that you don’t risk scratching it.
Next, remove the screws that keep the lens and gasket secure to the light housing. Once you’ve removed these, the lens should separate from the housing. Be careful when doing this and ensure that you’re not getting water inside the lens as well. This can cause it to crack and break in the future as well.
Once the gasket and lens are free, you can replace the light bulb and reassemble the fixture. Be sure to test the bulb before reinstalling it in the niche. A good way to do this is to submerge the housing in your pool and look for bubbles around the lens. If you see bubbles, the housing has a leak and needs to be repaired.
Comments
Post a Comment